What Size Contact Wheel For Hollow Grinding

i'm now looking at wheels and am wondering what sizes i need. i know people say 'the bigger the better' for hollow grinding, and use 14' wheels, high and using 5mm thick stock, i'd best use a 200mm contact wheel?

Get Price

CASE & SOLUTIONS

  • Tools And Tool Making

    Tools And Tool Making

    does the contact wheel size have any other implications other than than the curve of the hollow grind? is a 6' wheel too small for limited hollow 

  • How Can I Tell What Kind Of A Grind A Razor Has

    How Can I Tell What Kind Of A Grind A Razor Has

    quarter hollow is when the contact wheel of the grinder starts at the cutting edge and makes an uninterrupted radius to the spine. (or the other 

  • 8 Or 10 Inch Wheel For Me

    8 Or 10 Inch Wheel For Me

    get norm to set you up a grinder that will run both sizes. i have ground on i bought coote grinder 6 months ago with 10'and 8' contact wheel

  • Small Wheel Vs Big Wheel

    Small Wheel Vs Big Wheel

    i opted to get a small wheel set up with as many sizes that i could afford, some rubber, some steel. in my opinion if you do not intend to hollow grind, get the small wheel it for a big contact wheel, you want a solid tool arm.

  • Q'S On Choosing The Grinder Wheel Size

    Q'S On Choosing The Grinder Wheel Size

    i don't do hollow grinds but 8' or 10' seems like good all around wheel choices. smaller wheels work well for shaping the handles. i do flat grinds 

  • Belt Grinder- Pulley Size Question

    Belt Grinder- Pulley Size Question

    hi i'm getting either a 6' or 8' contact wheel 2x72 coote grinder. does the size of motor bore shaft diameter affect the overall sfpm? i use a 10' coote but have an 8' wheel as well. you can hollow grind with the smaller 

  • Finish And Polish For Knives

    Finish And Polish For Knives

    give me your thoughts on what size of contact wheel to buy for knifemaking. my platen currently, but want to be able to make nice hollow grinds.

  • Serrated Or Smooth Contact Wheel Size

    Serrated Or Smooth Contact Wheel Size

    to me, it seemed much easier to hollow grind with the 10' serrated wheel, but there are a lot of other variables. the test blade was a much larger 

  • Best Way To Hollow Grind

    Best Way To Hollow Grind

    the only way to hollow grind that i know of is with a wheel on a belt grinder. different size wheels are available depending on the radius you want. i know a 10 inch contact wheel is suppose to be the best for hollow grinds.

  • Large Contact Wheel Help

    Large Contact Wheel Help

    gonna buy a large contact wheel now, already have a small wheel attachment and flat platen. looking for help on size and smooth/serrated advice? want it mostly for profiling and maybe some hollow grinding down the line

  • The Knife Network Forums

    The Knife Network Forums

    comes with the 10' contact wheel flat platen motor and spindle on the as for wheel size, you can hollow grind on any size wheel but the 

  • Should I Go For The 24' Contact Wheel

    Should I Go For The 24' Contact Wheel

    it has a flat platen, a slack grinding attachment, a 10' serrated contact wheel, will a 24' wheel just leave a hollow grind so shallow i might as well just have not seen any of the chinese wheels on aliexpress in the 20' size.

  • 10 Inch Or 8 Inch Contact Wheel For The Kmg

    10 Inch Or 8 Inch Contact Wheel For The Kmg

    aside from cost. if you're going to hollow grind then you'll need both at some point, decide what size knife you're going to make the most.

  • Hollow Grind And Wheel Size Question

    Hollow Grind And Wheel Size Question

    my question is when does a hollow grind become a flat or tapered grind wheel size you grind on related to the width of steel you are grinding.

  • Hollow Grinding As A Beginner

    Hollow Grinding As A Beginner

    i have seen people hollow grind, and like hollow ground knives that seem to a contact wheel tooling arm so i can learn how to hollow grind knives. i use different size prescription bottles halved, and faced with desired grit 

  • Contact Wheel Diameter Recommendations

    Contact Wheel Diameter Recommendations

    if all you will be hollow-grinding is small pocket-knife blades, and 8' wheel i believe pendentive also chose the 2' serrated contact wheel for his platen, for the size blades you mentioned, i think an 8 inch would work well.

  • Share Your Tips, Hollow Grinding Straight Razor

    Share Your Tips, Hollow Grinding Straight Razor

    i havnt yet done hollow grind but have seen others do this trick. some i too have an 8' wheel, but i would say that it is much too large for a razor. the shape and size of a razor make it easy to grind, the thinness of the leaving the middle and toe of the blade still in contact and still being ground away.

  • What'S Hollow Grind 34 Grind

    What'S Hollow Grind 34 Grind

    newbie question - what is hollow grind and what is 3/4 grind? 'it's a grind done on the round, contact edge of an abrasive wheel (where the user stands in line with the wheel). depends on what size contact wheel is used.

  • Grizzly With 10' Wheel Or Build My Own

    Grizzly With 10' Wheel Or Build My Own

    ive read that the 10 wheel and a good platten really help th. with an 8' contact wheel if yoiu wish to hollow grind the motor gets in you way for i perosnally think that 8 to 10' is a good size for most folks starting outnot too 

  • What Size Wheel For Hollow Grind

    What Size Wheel For Hollow Grind

    you can make a hollow grind that simulates a much larger contact wheel by tilting the knife at an angle to the wheel. this takes rock steady hands 

  • Contact Wheels - What Sizes Do You Use

    Contact Wheels - What Sizes Do You Use

    i do very little hollow grinding on blades, but when i do, i use a 10', 70 durometer wheel. the difference between smooth and serrated wheels 

  • Contact Wheel- 8 Or 10 Serr Or Smooth

    Contact Wheel- 8 Or 10 Serr Or Smooth

    hey guys, i am in need of a contact wheel for my home built 2x72, and my question is what do you guys use, and what size do you think is the best? now for hollow grinds on an 8' wheel you can go roughly a 1/2' grind on 

Latest News

Copyright © 2021.Henan Mining Machinery Co., ltd. All rights reserved. Sitemap